TheShopRat on Nostr: I had a question about repairing an antique chair with a loose joint. The joint ...
I had a question about repairing an antique chair with a loose joint.
The joint itself was still intact. It was just the old glue that had failed. This is pretty common with older furniture.
My recommendation was to use a two-part epoxy to put it back together.
Epoxy is easy to work with and has gap-filling properties, which makes it a good choice for older joints where the wood and mating surfaces may not fit together as tightly as they once did.
Epoxy comes in different cure times. Five-minute epoxy is convenient, but sometimes a slower-setting version gives you more time to work and get everything positioned properly.
I’d clean up the joint with some sandpaper, remove the loose glue and debris, then apply the epoxy and reassemble it.
I’m talking about common, everyday antiques here, not highly prized or historically significant furniture where traditional restoration methods would be more appropriate.
Done properly, you’ll end up with a very strong joint.
#FabricatorsFieldGuide #grownostr #woodworking #diy
Published at
2026-11-18 16:21:11 UTCEvent JSON
{
"id": "f92e62498a6b45fe1220b13861685da8b9954661dedee9efc491e2fe448c51f5",
"pubkey": "8362e77d9fd268720a15840af33fd9ab5cdf13fabc66f0910111580960cd297a",
"created_at": 1795018871,
"kind": 1,
"tags": [
[
"imeta",
"url https://image.nostr.build/276666a896aacc62307cf49964c5e8dd019f66b6eacf8e40fc5deb9ffd441f10.jpg",
"blurhash efKwhOOZ.SVY^+$*oMr@WoR*~ArqVsbwNx]Pn#J7s:bbyDRjV@t7f6",
"dim 316x632"
],
[
"t",
"fabricatorsfieldguide"
],
[
"t",
"grownostr"
],
[
"t",
"woodworking"
],
[
"t",
"diy"
],
[
"r",
"https://image.nostr.build/276666a896aacc62307cf49964c5e8dd019f66b6eacf8e40fc5deb9ffd441f10.jpg"
],
[
"client",
"Damus"
]
],
"content": "I had a question about repairing an antique chair with a loose joint.\n\nThe joint itself was still intact. It was just the old glue that had failed. This is pretty common with older furniture.\n\nMy recommendation was to use a two-part epoxy to put it back together.\n\nEpoxy is easy to work with and has gap-filling properties, which makes it a good choice for older joints where the wood and mating surfaces may not fit together as tightly as they once did.\n\nEpoxy comes in different cure times. Five-minute epoxy is convenient, but sometimes a slower-setting version gives you more time to work and get everything positioned properly.\n\nI’d clean up the joint with some sandpaper, remove the loose glue and debris, then apply the epoxy and reassemble it.\n\nI’m talking about common, everyday antiques here, not highly prized or historically significant furniture where traditional restoration methods would be more appropriate.\n\nDone properly, you’ll end up with a very strong joint.\n\n#FabricatorsFieldGuide #grownostr #woodworking #diy\n\nhttps://image.nostr.build/276666a896aacc62307cf49964c5e8dd019f66b6eacf8e40fc5deb9ffd441f10.jpg",
"sig": "cd6f5f9183b7baf725473e201aefcce1b206df0d453b5c269d3a6b0f054621ffb71f597aee9e4f3bc7070942cab3befe3017e6c200ce946bf94604c41e999e71"
}